5G RLC Development Mastery Course Introduction

2.1 TM-RLC Entity Behavior 4.2.1.1.2, 4.2.1.1.3

2.2 UM-RLC Entity Behavior-Tx Side 4.2.1.2.2

2.3 UM-RLC Entity Behavior-Rx Side 4.2.1.2.3

2.4 AM-RLC Entity Behavior-Tx Side 4.2.1.3.2

2.4 Example 1 First Transmission with Segmentation

2.4 Example 2 Re-Transmission with Re-Segmentation

2.5 AM-RLC Entity Behavior-Rx Side 4.2.1.3.3

2.5 Example 3- Duplicate Detection, Example 4-Loss Detection and Retransmission Request, Example 5-Re-Assembly as soon as Possible

3.1 TM Data Transfer Procedures-Tx Side 5.2.1.1.1

3.2 TM Data Transfer Procedures-Rx Side 5.2.1.2.1

Complete Walkthrough

3.3 UM Data Transfer Procedures-Tx Side 5.2.2.1.1

3.4 UM Data Transfer Procedures-Rx Side 5.2.2.2.2

3.4.1 UM Data Transfer Procedures-Rx Side-Action When a UMD PDU is Received from Lower Layer 5.2.2.2.2

3.4.2 UM Data Transfer Procedures-Rx Side-Action When a UMD PDU is Placed in the Reception Buffer 5.2.2.2.3

Example: UM RLC Receive Operations-5.2.2.2.3

3.4.3 UM Data Transfer Procedures-Rx Side-Action When t-Reassembly Expires 5.2.2.2.4

3.5 AM Data Transfer Procedures-Tx Side 5.2.3.1.1

3.6 AM Data Transfer Procedures-Tx Side: Transmitting Window Definition

3.7 AM Data Transfer Procedures-Tx Side: SN Assignment for New SDUs

3.8 AM Data Transfer Procedures-Tx Side: Positive ACK Handeling

3.9 AM Data Transfer Procedures-Tx Side: Discard of SDU when TX Discarded SDU is configured

3.10 AM Data Transfer Procedures-Rx Side 5.2.3.2.1

3.11 AM Data Transfer Procedures-Rx Side: Action When an AMD PDU is Received from Lower Layer 5.2.3.2.2

3.12 AM Data Transfer Procedures-Rx Side: Actions When t-Rx Discard Expires 5.2.3.2.5

3.13 AM Data Transfer Procedures-Rx Side: Actions When t-Re-Assembly Expires 5.2.3.2.4

4.1 ARQ Procedure in AM RLC

5.1 RLC AM Re-transmission Handling Procedure

6.1 Polling in AM RLC

6.2 Counter Based Polling

6.3 Event Based Polling

6.4 Reception of a Status Report 5.3.3.3

6.5 Expiry of t-Poll Retransmit 5.3.3.4

7.1 Status Reporting in AM RLC

7.2 Polling from Peer 5.3.4.1

7.2 Polling from Peer-Examples

7.3 Detection of Reception Failure (t-Re-Assembly Expiry)

7.4 Detection of Discard (t-RXDiscard Expiry)

7.5 Status Prohibit Timer (t-Status Prohibit)

7.6 Constructing a Status PDU

Complete Walkthrough: Poll + Status Construction

8.1 Data Volume Calculation for MAC Buffer Status Reporting

8.2 Regular RLC Data Volume (For MAC BSR)

8.3 Delay Critical RLC Data Volume

8.4 Delay Reporting RLC Data Volume

8.5 Inclusion of Status PDU in Data Volume

9.1 TMD PDU

9.2 UMD PDU 6.2.2.3

9.3 AMD PDU 6.2.2.4

9.4 STATUS PDU 6.2.2.5

Complete Walkthrough -From SDU to PDU to Status

LAB1: TM RLC Entity (TX/RX)

LAB2: UM Segmentation

LAB3: UM Reassembly & Reordering

LAB4: AM Transmitting Window

LAB5: AM Receiving Window

LAB6: STATUS PDU Generation

LAB7: ARQ Retransmission Engine

LAB8: Polling Logic Implementation

LAB9: t-PollRetransmit Timer

LAB10: Amarisoft Log Validation

Capstone Project: End-to-End AM Simulation(Optional)